Can you work with our general contractor, builder, or project manager?

Yes. We regularly coordinate with general contractors, builders, project managers, and other trades to help keep the project moving. Good communication matters on commercial jobs, and we make sure our electrical work lines up with the construction schedule, inspections, and site requirements. We stay organized, show up when expected, and help solve problems before they turn into delays.

How do you make sure the work meets code and passes inspection?

Code compliance is a big part of every commercial electrical project we take on. We follow current electrical codes, local requirements, and approved plans from the start. We also pay close attention to load calculations, panel layout, circuit design, grounding, and safety systems. By doing the work right the first time, we help reduce inspection issues, change orders, and costly rework.

How much does commercial new construction electrical cost?

The cost depends on the size of the building, the type of business, the service size, lighting needs, special equipment, and the project timeline. We provide clear estimates based on your plans and job details, so you know what to expect before work begins. We believe in honest pricing and practical recommendations that protect your budget without cutting corners on safety or quality.

What if changes come up during construction?

Changes are common on new construction projects, and we’re prepared for that. If plans shift, equipment changes, or the layout is updated, we communicate quickly and explain the impact on cost and schedule before moving forward. Our job is to help you avoid surprises and keep your commercial electrical installation as smooth as possible.

Why should we choose MIKCOR ELECTRIC LLC for our commercial new construction project?

At MIKCOR ELECTRIC LLC, we bring hands-on experience, dependable service, and a strong commitment to quality on every job. Since 2022, we’ve been helping Austin properties with residential and commercial electrical work built to last. We focus on long-term solutions, clear communication, and professional workmanship from start to finish. If you want a commercial electrician who takes your project seriously and works hard to earn your trust, contact us today to discuss your plans and schedule an estimate.

Commercial New Construction Electrical

At MIKCOR ELECTRIC LLC, we handle commercial new construction electrical work from the ground up. When you are building a new office, retail space, restaurant, warehouse, tenant build-out, or other commercial property, the electrical system has to be planned right from day one. We work with builders, owners, developers, and project managers in Austin to install safe, code-compliant, and dependable electrical systems that support the way your business will operate now and in the future.

New construction is not the place for shortcuts. A well-built electrical system affects safety, daily operations, energy use, equipment performance, and long-term maintenance costs. Our job is to make sure your power distribution, lighting, circuits, and electrical infrastructure are installed correctly, coordinated with the construction schedule, and ready for final inspection and use.

What our commercial new construction electrical service includes

We provide complete electrical installation for new commercial buildings and commercial interior construction projects. The scope can vary based on the property type, occupancy, equipment needs, and local code requirements, but our work commonly includes:

Electrical planning and layout coordination
Temporary power setup for construction sites
Service entrance installation
Main panels, subpanels, switchgear, and distribution equipment
Conduit, raceways, boxes, and complete rough-in work
Branch circuit wiring and dedicated circuits
Interior and exterior lighting installation
LED lighting systems and lighting controls
Emergency lighting and exit signs
Receptacles, switches, and device installation
Equipment wiring and connections
HVAC electrical connections
Break room, office, and tenant space electrical build-outs
Data and low-voltage coordination as needed
Grounding and bonding
Surge protection solutions
Final trim-out, testing, and startup
Punch list corrections and inspection support

Electrical planning for a smoother project

One of the biggest parts of successful commercial construction is good planning. We review plans, coordinate with other trades, and help identify electrical needs early so the project can move forward with fewer delays and fewer costly changes. That includes looking at service size, panel locations, lighting layout, equipment loads, outlet placement, dedicated circuits, and future expansion needs.

We understand that every commercial project is different. A retail store has different lighting and power needs than a restaurant. An office build-out needs a different layout than a warehouse or flex space. We take the time to understand how the property will be used so the finished electrical system supports the business inside the building.

Service entrance and power distribution

Your building needs a strong electrical backbone. We install and coordinate the main electrical service so power is brought into the building safely and distributed where it needs to go. This includes service entrance components, meter equipment when applicable, main disconnects, distribution panels, and subpanels.

Proper load planning matters in commercial new construction. We size and install systems based on the expected electrical demand of lighting, outlets, appliances, machinery, HVAC systems, computers, refrigeration, and specialty equipment. The goal is to provide stable, reliable power while helping prevent overload issues, frequent breaker trips, and expensive changes later.

Commercial wiring and rough-in work

During the rough-in phase, we install the framework of the electrical system before walls and ceilings are closed. This includes conduit runs, electrical boxes, wiring pathways, branch circuits, and infrastructure for switches, outlets, lighting, and equipment. Clean, organized rough-in work is important because it affects the speed of later phases and the long-term serviceability of the building.

We follow current electrical code and industry best practices throughout the installation process. That means attention to circuit design, conductor sizing, grounding, box fill, support requirements, labeling, and safe equipment installation. We build systems that are made to work hard in real commercial environments.

Commercial lighting installation

Lighting does more than brighten a space. It affects safety, appearance, productivity, and energy costs. We install commercial lighting systems for interior and exterior areas, including office lighting, retail lighting, security lighting, parking lot lighting, warehouse lighting, common area lighting, and site lighting as project scope requires.

We also install LED lighting and lighting controls to help improve efficiency and reduce maintenance. Depending on the project, this may include occupancy sensors, dimmers, timers, photocells, and other control solutions. Good lighting design can make a building more attractive to customers, easier for employees to work in, and more cost-effective to operate over time.

Dedicated circuits and equipment power

Commercial buildings often have equipment that needs its own circuit and reliable power source. We install dedicated circuits for appliances, computers, point-of-sale systems, break room equipment, refrigeration units, specialized tools, server equipment, and other business-critical loads. We also coordinate electrical connections for HVAC units and other mechanical systems so all major systems work together properly.

By installing dedicated power where it is needed, we help reduce performance issues and protect sensitive equipment from avoidable electrical problems. This is especially important in businesses that rely on consistent uptime.

Safety systems and code compliance

Commercial electrical work must meet strict safety and code requirements. We take that seriously. Our installations are completed with a focus on safe wiring methods, proper grounding and bonding, overcurrent protection, clear labeling, and inspection readiness. We support projects through required inspections and address punch list items as needed to help keep the job moving.

Emergency lighting and exit signs are also key parts of many commercial new construction projects. These systems help protect occupants and support code compliance in the event of a power outage or emergency. We install these components where required and make sure they are properly integrated into the overall electrical system.

Built for long-term performance

At MIKCOR ELECTRIC LLC, we do not believe in quick fixes or bare-minimum work. Even in new construction, we focus on long-term solutions. That means installing electrical systems that are dependable, serviceable, and built with the future in mind. If your business may grow, add equipment, expand work areas, or change how the space is used later, smart planning now can save time and money down the road.

We know that delays and rework can hurt a construction budget fast. That is why we stay focused on communication, workmanship, and doing the job right the first time. Our team works hard to keep projects organized and on schedule while maintaining the quality you expect from a professional commercial electrician.

Who we serve

Our commercial new construction electrical service is a good fit for many types of projects in Austin, including:

Office buildings and office suites
Retail stores and shopping spaces
Restaurants and cafes
Warehouses and industrial spaces
Medical and professional offices
Schools, churches, and community facilities
Mixed-use and tenant improvement projects
Standalone commercial buildings and shell spaces

Why contractors and owners choose us

As a local Austin electrical company, we take pride in being reliable, professional, and easy to work with. Since 2022, we have built our reputation on quality workmanship and honest service. When you hire MIKCOR ELECTRIC LLC, you are working with a team that understands both residential and commercial electrical systems and brings a practical, hands-on approach to every project.

Customers choose us because we focus on:

Clear communication throughout the project
Safe, code-conscious installation
Dependable scheduling and coordination
Quality materials and workmanship
Long-term performance, not temporary fixes
Professional service from a local company that cares about its work

Let’s power your new commercial project

If you are planning a commercial new construction project in Austin, we are ready to help. Whether you need full electrical installation for a new building or electrical work for a commercial build-out, MIKCOR ELECTRIC LLC can provide the experience, planning, and workmanship needed to keep the project moving and deliver a reliable finished system.

Contact us today to discuss your plans, request an estimate, or schedule service. We would be glad to learn more about your project and help you build it right from the start.